*Some photos show optional Carbon Turbo Tube. Finde the turbo tube here:
Fitment: Mercedes A35 AMG, CLA35 AMG, A250, CLA250
Performance Increase : 15-20hp, 15-18ft-lb
The Mercedes A35 AMG Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Reducing heat soak and increasing internal volume are the main considerations when designing an intake for turbocharged engines. In the A35, the intake system is in close proximity to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. In order to reduce the restriction from a sealed intake we have increased the volume of the airbox by relocating the ECU and also allowing an opening in the airbox on the cold side which is away from the direct heat of the manifold. The carbon inlet tube is larger in internal volume with a starting internal diameter of 111mm (4.4?) smoothly tapering down to match the turbo inlet pipe. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Dyno Testing
Dyno testing was carried out by MSL Performance who are a Mercedes specialist based in the UK. A fully standard A35 AMG was tested with the stock airbox and then with the Eventuri intake back to back whilst ensuring external conditions were the same. As can be seen below the intake provides a gain in performance throughout the RPM range. The highlighted point shows a significant gain of power where the intake allows a higher flow rate to be maintained in the higher RPM range where the stock airbox starts to become a restriction. The resulting gains are noticeable on the road with better throttle response and improved acceleration times. With a tuned A35 we would expect even better gains as the demand from the turbo increases.
The Eventuri A35 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Each intake system consists of:
Carbon Fiber Airbox
Bespoke High Flow Dry Cone Filter
Carbon Fiber Inlet Tube
CNC Machined Inlet Flange
Laser Cut Stainless Steel Brackets and ECU Cover
Silicon Coupler with OEM Specification Clamps
SKU | 6455 |
---|---|
Hersteller SKU | EVE-A35-CF-INT |
Colour | carbon |
Car Manufacturer | Mercedes Benz |
Car Model | A-Class, CLA-Class, GLB-Klasse |
Car Modeltype | V177, W177, X247, Z177 |
Motorization | A250, A35 AMG, CLA 250, CLA35 AMG, GLB35 AMG |
Product Type | Intakes |
Brand | Eventuri |
Material | Carbon |
Shipping class | 2 |
Be the first to review this product
CFD verwendet Cookies, um Deinen Online-Einkauf so angenehm wie möglich zu gestalten. Wenn Du unseren Service weiterhin nutzt, gehen wir davon aus, dass Du der Verwendung von Cookies zustimmst. Hier findest Du weitere Informationen zu Cookies und wie Du sie ablehnen kannst.